Renesas M37760T-RPD-E Switch User Manual


 
( 37 / 64 )
(2) Setting CLOCK Tab
CAUTION
Note on Setting XCIN Pin:
When using P31/XCIN pin as a sub-clock, set the SW1 switch to the "XCIN" side.
For details on the switch settings of the emulation pod, see "3.2 Switch Settings"
(page 23).
Make the settings of the clock supply.
Main
Choose the clock supply for XIN pin.
INTERNAL: Supplied from the
oscillator circuit board of
the emulation pod
EXTERNAL: Supplied from the
oscillator circuit of the
target system
Sub
Choose the clock supply for XCIN pin.
Read the precaution below.
INTERNAL: Supplied from the
oscillator circuit (32.768
kHz) of the emulation pod
EXTERNAL: Supplied from the
oscillator circuit of the
target system