Filter
Top Products
11
2. Installing Options
R
CAUTION:
Important
❒ The voltage rating of the connector for options is 24V DC or less.
❒ Turn the power off before removing the Paper Feed Unit Type 2600, 1-bin
Shift Sort Tray Type 2600, or Mailbox CS380. Removing any of these units
with the power on may cause the printer to fail.
❖
❖❖
❖ Option List
Note
❒ See the inside front cover of this manual to confirm which printer (Basic
model or Network standard model) you have.
❍ : Available option
*1
With Basic model, these cannot be installed at the same time.
*2
With Network standard model, these cannot be attached at the same time.
Note
❒ Up to two Paper Feed Units can be attached to the printer at the same time.
❒ The installation of the Paper Feed Unit is necessary to attach the Envelope
Feeder Unit.
• Be sure to turn off the printer and wait for about an hour before installing
options. Not waiting for the printer to cool down can result in a burn.
• When lifting the printer, use the inset grips on both sides of the printer, oth-
erwise the printer might fall and cause personal injury.
• When you move the printer, unplug the power cord from the wall outlet to
avoid a fire or an electric shock.
Basic model Printer Network standard
model Printer
Paper Feed Unit Type 2600 ❍❍
Envelope Feeder Type 2600 ❍❍
1-bin Shift Sort Tray Type 2600 ❍❍
CS380 (Mailbox) ❍❍
AD410 (Duplex Unit) ❍❍
Memory Unit TypeB 64MB ❍❍
Hard Disk Drive Type 2600 ❍❍
Network Interface Board Type 2610
*1
❍
1394 Interface Unit Type 4510
*1
*2
❍❍
802.11b Interface Unit Type A
*1
*2
❍❍