Ricoh 400780 Printer User Manual


 
802.11b Interface Unit Type A
29
2
802.11b Interface Unit Type A
Note
Depending on the model you use,
the 802.11b Interface Unit, the 1394
Interface Unit, and the Network
Interface Board cannot be installed
to the printer at the same time. For
more information, see p.11 In-
stalling Options.
Important
Before touching the 802.11b Inter-
face Unit, touch something metal
to discharge any static electricity.
Static electricity can damage the
802.11b Interface Unit.
A
AA
A
Check the contents of the box for
the following items:
802.11b Interface Unit
Installation Guide
B
BB
B
Confirm that the followings are
true:
The power switch is turned off.
The interface cable is un-
plugged from the printer.
Note
If the Duplex Unit is not at-
tached, go to step
D
.
C
CC
C
If the Duplex Unit is attached,
push down the lever on right side
(A
AA
A) and pull out the Duplex Unit
until it stops (B
BB
B).
D
DD
D
Use a coin to remove the two
screws.
Note
These screws are used again in
step
N
.
E
EE
E
Pull out the handle of the control-
ler board.
F
FF
F
Pull the handle and slide the con-
troller board out.
ZGDX320J
ZGDX280J
ZGDX370J
ZGDX260J