Ricoh 400780 Printer User Manual


 
Installing Options
28
2
Connecting the 1394 Interface
Cable to the Printer
A
AA
A
Attach the 1394 interface cable to
the jack on the 1394 Interface
Unit.
Both types of jack are available.
B
BB
B
Connect the other end of the 1394
interface cable to the computer or
the other IEEE 1394 node.
Note
After installing the last option that
you want, print the configuration
page to confirm the installation. If
the new device is listed in the col-
umn of configuration options, then
it has been properly installed. For
more information about printing
the configuration page, see "Print-
ing the Configuration Page" in the
Printer Reference on the CD-ROM
labeled "Operating Instructions".
-
--
-1394 Interface Unit
specifications
Interface Connector:
IEEE 1394 (6 pins × 2)
Required cable:
1394 interface cable (6 pins x 4
pins, 6 pins x 6 pins)
Important
You cannot plug devices togeth-
er to create loops.
Do not use a cable more than 4.5
meters (14.8 feet) long.
Connectable number of devices in a
bus:
Maximum 63
Allowed cable hops in a bus:
Maximum 16
Power supply:
Nonpower supply
Cable Power repeated (IEEE
1394a-2000 compliant)
ZGDX550J