Filter
Top Products
Settings You Can Change with User Tools
57
4
Reference
p.124 “Changing the Paper Size”
❖
❖❖
❖ Paper Type: Bypass tray
Sets the display so you can see what type of paper is loaded in the bypass tray.
❖
❖❖
❖ The paper types you can set for the bypass tray are as follows:
No Display, Recycled Paper, Special Paper, Colour Paper, Letterhead, Pre-
printed Paper, Prepunched Paper, Bond Paper, Cardstock, Label Paper,
Thick Paper, OHP, Plain: Dup.Back, Thick: Dup.Back
Note
❒ Default: No Display
❖
❖❖
❖ Paper Type: Tray 1–4
Sets the display so you can see what type of paper is loaded in each paper
tray. The print function uses this information to automatically select the pa-
per tray.
❖
❖❖
❖ The paper types you can set for trays are as follows:
• The paper types you can set for trays 1 and 2 are as follows:
• No Display, Recycled Paper, Special Paper, Colour Paper, Letter-
head, Preprinted Paper, Prepunched Paper, Bond Paper, Cardstock,
Label Paper, Thick Paper, OHP
• The paper types you can set for trays 3 and 4 are as follows:
• No Display, Recycled Paper, Special Paper, Colour Paper, Letter-
head, Preprinted Paper, Prepunched Paper, Bond Paper, Cardstock
Note
❒ Default:
• Paper Type: No Display
• Copying Method in Duplex: 2 Sided Copy
• Apply Auto Paper Select: Yes
❒ When paper of the same type and size is loaded in two different paper
trays and you want to specify tray for 2 Sided Copy and tray for 1 Sided
Copy, specify the upper tray for 2 Sided Copy. If one of the trays is speci-
fied as the default in Paper Tray Priority, assign 2 Sided Copy to that tray.
❒ A mark appears next to the paper tray if [No] is selected in Auto Paper
Select.
Limitation
❒ [Auto Paper Select] can only be selected for the copier function if [No Display]
and [Recycled Paper] are selected. If [No] is selected, Auto Paper Select is not
valid for the tray.
ThemisC1_AE_zentai_pre_FM.book Page 57 Thursday, July 28, 2005 2:13 PM