Filter
Top Products
2 INSTALLATION
1.
2.
3.
4.
5.
3-2 Programming the Date and Time
You should program the correct date and time, because the date and time in your machine’s clock is
normally printed on reports and on your pages when they are printed out at the other end. Also, if you
use Send Later, the machine will send your fax when this clock reaches the time that you designated
for Send Later.
Make sure that the unit is in 6.
standby mode.
READY 100’% 00 00AM
SET DOCUMENT
To change AM to PM (or PM to
AM), press *
once. If the dis-
play is correct, go to step 7.
PreSS Function 5 0 Yes
DATE & TIME
y/*/#, c
MAY 10
91 02 30PM
I
DATE & TIME
y/*/#/C
JAN 01 ’91 00 00AM
Example: Change to May 10th 1991, at 2:30
7.
pm.
To change JAN to MAY press
# 4 times. Press * to come
back if you go too far.
DATE & TIME
y/*/#/C
MAY 01
91 00 00AM
To move the cursor to the next
item, press
Clear .
DATE & TIME KPAD/YIC
MAY 01 ’91 00 00AM
Type in the date and time at the
keypad.
DATE & TIME
y/* J#/c
MAY 10 91 02 30AM
If you want to edit the screen, press
Clear .
The cursor returns to the month.
Tostorethe clock, press Function
READY 10004 02 30PM
SET DOCUMENT
In our example, press
10910230.
18