Filter
Top Products
3 ROUTINE OPERATION
2. Using the memory
5.
6.
7.
1.
Using the memory allows the feeder to remain free for other operations.
The first part of the procedure is the same as for not using memory, up to and including step 4.
Then
READY
100% 02 30PM
I
MEMORY TRANS~
Y/’N
Press Yes .
READY
100°rt 02 30PM
*/ QUICK /Sp EED/Kp AD
Dial. Use Speed Dial, Quick Dial,
Group Dial, or a full telephone
number.
Press
Yes .
8. If you wish to send the message to
more than one address, dial an-
other number (step 6).
Otherwise, press
Start .
● Quick Dial, page 40.
● Speed Dial, page 40.
I
. Group Dial, page 41.
I
For more information about the memory, see page 50.
3. Converting a Send Later message in the feeder into a Send Later message from memory
This procedure also works for messages waiting in the feeder for redialing. It frees the document
feeder for other work by storing the message in the memory, so it is only available if there is space in
the memory.
If either
~ or~l aredisplayedandamessage
is in the feeder, do the following.
PreSS Memory .
2. Press Start (or press NO to
cancel the operation).
READY
100?u 02 30PM
MEMORY TRANS~START /’N
Note :
If MEMORY TRANSMIT N/A is dis-
played, the message in the feeder is
not for Send Later or redialing. It
may be set up for somebody to poll.
This cannot be stored into memory.
If you remove the document, you will
have tore-program the polling oper-
ation (see Polling Transmission
page 57).
The document will be stored in the memory
and transmitted at the correct time.
Note : Alternative Destination, if pro-
grammed for this message, will be
cancelled.
39