Filter
Top Products
19
English
Introduction
7 Eco Dim the projector lamp which will
lower power consumption and extend
the lamp life.
8 Volume +/- Increase/decrease speaker volume.
9 Video Press “Video” to choose Video in ter-
minal.
10 HDMI Press “HDMI” to choose HDMI in
terminal.
11 Magnify Enlarge part of the screen image. You
cannot use this function when “Native”
is selected in “Aspect” setting.
12 S-Video Press “S-Video” to choose S-Video in
terminal.
13 Power Refer to the “Power On/Off the Projec-
tor” section. (See pages 23~24)
14 Menu Press “Menu” to launch the Onscreen
display (OSD), or go back to the previ-
ous menu. (See page 29)
15 Input Switch among Computer1, Computer2
, Component, Video, S-Video, DVI and
HDMI.
16 Auto Set Automatically adjust the RGB signal
from the computer.
17 Picture Switch the Image mode.
18 Keystone +/- Adjust the image to compensate for
distortion caused by tilting the projec-
tor.
19 Computer1 Press “Computer1” to choose Com-
puter 1 In terminal.
20 Computer2 Press “Computer2” to choose Com-
puter 2 In terminal.
21 Aspect Use this function to choose your de-
sired aspect ratio for the screen.
22 Status Shows the projector’s current status.
(See page 43)
23 Number Key
Press “Input” key
when you want to
select Component or
DVI-D input source.
N
o
t
e