Filter
Top Products
42
English
User Settings
Default Settings 2 |
Network Setting
Connection Status
Display the network connection status.
MAC Address
Display MAC address.
DHCP
If you change the setting from one to another, when you exit the
OSD menu, the new setting will take effect on next open.
Enable: Assign network settings to the projector from a DHCP
server automatically.
Disable: Assign network settings such as an IP address manu-
ally.
IP Address
Set an IP address . Using number key on the remote control. Or
display IP address provided from DHCP server when DHCP is
set to “Enable”.
Subnet Mask
Set subnet mask number. Using number key on the remote con-
trol. Or display IP address provided from DHCP server when
DHCP is set to “Enable”.
Default Gateway
Set the default gateway of the network connected to the projector.
Using number key on the remote control. Or display IP address
provided from DHCP server when DHCP is set to “Enable”.
Set
Select “OK” to apply the setting.
Be sure to set
“Control Method” to
“LAN” before start-
ing to set Network
setting.
N
o
t
e