Filter
Top Products
23
English
Basic Operations
Powering On the Projector
Ensure that the power cord and signal cable are securely
connected. The Power indicator will turn red.
Remove the lens cap.
Turn on the lamp by pressing “Power” on the control panel
or the remote control.
The Power indicator will ash blue.
The startup screen will display in approximately 5 seconds.
After the screen disappears, the Power indicator will turn
blue.
The rst time you use the projector after purchase, the lan-
guage menu is displayed after the startup screen.
(See page 37)
Turn on your source (computer, notebook, video player,
etc.) The projector will detect your source automatically.
1.
2.
3.
4.
Powering On/Off the Projector
Turn on the projec-
tor rst and then the
signal sources.
N
o
t
e
Lens Cap
Power
CAUTION:
Do not look into the lens while the lamp is on. The strong light from the lamp may
cause damage to your eyesight.
Do not block the air intake or exhaust. Doing so could cause a re due to internal
overheating.
Do not place your hands, face, or other objects near the air exhaust, the lamp cover
or the bottom of the unit. Doing so could result in injury and/or damage the object.
•
•
•
If you connect
multiple sources
at the same time,
press “Input” or
use “Computer1”,
“Computer2”, “S-
Video”, “Video”,
“HDMI” on the
remote control to
switch inputs.
N
o
t
e
2
1
OR