Filter
Top Products
34
English
User Settings
Start-up Screen
Use this function to set the desired startup screen. If changes are
made they will take effect the next time the projector is powered
on.
On: Display the startup screen.
Off: No logo is displayed.
User Logo
User logos can be displayed in the start-up screen or as the back-
ground when there are no input signals.
Register Logo: Project the image to be registered as a user
logo, and then execute this function.
How to capture the image:
Find the image from input source.
Project the image.
Choose [Register Logo --> Execute], and select [OK]
Choose [Register Logo --> Execute], and select [OK]
Start capturing the screen.
Start capturing the screen.
When nished, it will show the message below.
1.
2.
3.
4.
5.
It takes up to 120
seconds to capture
the picture. This may
vary by resolution of
the input signal.
N
o
t
e