Filter
Top Products
24
English
Basic Operations
Powering Off the Projector
Press the “Power” and you will see a message as below on
the on-screen display.
Press the “Power” again to turn off the projector lamp.
The cooling fan continues to operate for about 60 seconds
for cooling cycle and the Power indicator will ash red.
After cooling down, the light stops ashing, and then the
projector will enter the standby mode.
If you wish to turn the projector back on, you must wait
until the projector has completed the cooling cycle and
has entered standby mode. Once in standby mode, simply
press “Power” to restart the projector.
Disconnect the power cord from the electrical outlet and
the projector.
1.
2.
3.
4.