Filter
Top Products
Controls and Functions
12 Runco CL-610 Series Owner’s Operating Manual
PRE
L
IMINAR
Y
6. Memory Preset Buttons:
MEM1
Press to recall settings for the current input from the “Memory 1” memory preset.
ISF NIGHT
Press to recall settings for the current input from the “ISF Night” memory preset.
ISF DAY
Press to recall settings for the current input from the “ISF Day” memory preset.
FACT
Press to recall the factory-default settings for the current input.
7. Aspect Ratio Selection Buttons
Use these buttons to select an aspect ratio directly, as follows:
ANA 16:9 (Anamorphic)
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.
4X3 (Standard 4:3)
Scales the input signal to fit 4:3 display mode in the center of the screen.
LBOX (Letterbox)
For viewing LaserDisc movies or non-anamorphic DVDs on a 16:9 screen.
VWIDE (VirtualWide)
Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.
CINEMA
For viewing 2.35:1 source material.
VCINE (CL-610/CineWide and CL-610LT/CineWide only)
Selects the Virtualwide 2.35 aspect ratio, used for viewing 16:9 source material on a
2.35:1 screen.
8. 0 - 9
Use these keys to enter menu passcodes.
9. Picture-In-Picture (PIP) / Picture-By-Picture (PBP) Controls:
PBP
Press to activate PBP mode.
ACT
Press to switch to the active window in PIP or PBP mode.
PIP
Press to activate PIP mode.
PIP+
Press to enlarge the PIP window.
PIP-
Press to shrink the size of the PIP window.