Filter
Top Products
Installation
14 Runco CL-610 Series Owner’s Operating Manual
PRE
L
IMINAR
Y
3.2
Quick Setup
Table 3-1 gives a quick overview of the CL-610 installation process. The sections
following this one provide detailed instructions.
Installation should be performed by a qualified custom video
installation specialist.
Table 3-1. Installation Overview
Step Procedure
For Details, Refer to
page...
1
Choose a location for the projector 15
2
Mount the projector 18
3
Connect signal sources to the CL-610 19
4
Connect external controller to RS-232 port (optional) 23
5
Connect 12-volt trigger output to retractable screen or
other, +12-volt trigger-activated equipment (optional)
24
6
Apply power to the projector 24
7
Change the OSD Language (optional) 25
8
For rear-screen and/or ceiling-mount installations, select
the proper picture orientation
25
9
Primary lens adjustments: projected image size (zoom) and
focus
25
10
Install CineWide anamorphic lens
(CL-610/CineWide and CL-610LT/CineWide only)
26
11
CineWide lens adjustments: position, angle, geometry and
focus
27
12
Projector calibration: adjust the following for each input;
save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Input position
37 through 43
Note