Filter
Top Products
Operation
30 Runco CL-610 Series Owner’s Operating Manual
PRE
L
IMINAR
Y
4.5
Turning Off the Power
1. Press the OFF button to turn off the projector.
2. The POWER LED blinks green and the fans will
speed up for a quick cool-down. The projector will
not accept any commands during the cool-down
period.
3. After approximately three minutes, the fans will
stop running and the POWER LED lights solid
orange.
4. You can turn the projector back on after approximately two minutes.
4.6
Using the On-Screen
Menus
• Press the MENU button on the remote control to display the Main Menu. To select a
menu item, use the UP and DOWN buttons on the remote control to highlight it. Press
ENTER or
to confirm your selection.
• Use the arrow buttons to select menu items or change settings.
• Press EXIT to return to the previous menu.
• Press MENU to turn off the OSD menu. (When the Main Menu is displayed, pressing
EXIT also turns off the menu.)
The CL-610 OSD menus are arranged hierarchically, as shown in Figure 4-1. Depending
on the selected input source and signal characteristics, some menu options may not be
available.
LIGHT
OFFON
VID S-VID COMP1
RGBHD HDMI
COMP2