Filter
Top Products
1.3 <
Introduction>
Control panel overview
1
Keyboard
: Used to enter characters. Used to store frequently
dialed fax number and dial them with a touch of the buttons. (See
page 2.3.)
12
Back
: Sends you back to the upper menu level.
2
Address Book
: Allows you to store frequently used fax numbers in
memory or search for stored fax numbers or email addresses. Also
allows you to print an
Address Book
/
Phone Book
list. (See page
8.5.)
13
Status
: Shows the status of your machine. See page 1.4.
3
Resolution
: Adjusts the document resolution for the current fax job.
14
Darkness
: Adjusts the document darkness for the current copy job.
4
Redial/Pause
: In Standby mode, redials the last number, or in Edit
mode, inserts a pause into a fax number.
15
Original Type
: Selects the document type for the current copy job.
5
Fax
: Activates Fax mode.
16
Reduce/Enlarge
: Makes a copy smaller or larger than the original.
6
Copy
: Activates Copy mode.
17
Duplex
: Allows you to print documents on both sides of the paper.
7
Scan/Email
: Activates Scan mode.
18
Toner Save
: Allows you to save on toner by using less toner in
printing.
8
Display
: Shows the current status and prompts during an operation.
19
Number keypad
: dials a number or enters alphanumeric characters.
9
Menu
: Enters Menu mode and scrolls through the available menus.
20
On Hook Dial
: Engages the telephone line.
10
Scroll buttons: Scroll through the options available in the selected
menu, and increase or decrease values.
21
Stop/Clear
: Stops an operation at any time. In Standby mode,
clears/cancels the copy options, such as the darkness, the
document type setting, the copy size, and the number of copies.
11
OK
: Confirms the selection on the screen.
22
Start
: Starts a job.