Filter
Top Products
INSTALLATION AND SETUP
4
of the paper from the
machine.
5
Close the cover.
The machine cuts the
paper automatically.
Pull out about 10 cm (4 in)
<If you have an FX600>
1
Unplug the power cord.
2
Open the cover by pushing
the cover release latch (on
the right side of the
machine).
3
Insert the paper roll.
4
Push the edge of the paper into the
slot which reads “Insert the leading edge
of the paper as shown” and pull the
paper out about 10 cm (4 in) from the
back.
CHAPTER TWO: INSTALLATION AND SETUP 2.3