Filter
Top Products
T
ROUBLESHOOTING &
M
AINTENANCE
4
Wipe the white roller
surface with a soft cloth
dampened with water.
5
Clean the scanning glass,
located beneath the white
roller.
6
Clean the rubber piece
also.
7
Replace the roller
8
Close the cover firmly.
9
Plug the power cord back
in.
4
Dry the roller surface and scanning
glass with a soft dry cloth. Be careful not
to scratch the glass surface.
4
Be careful not to scratch the surface.
4
Wipe the surface of the rubber with
a damp soft cloth, then wipe dry.
C
HAPTER
F
IVE
: T
ROUBLESHOOTING &
M
AINTENANCE
5
.7