Filter
Top Products
1.20
Setting up your machine
4. Press
ˆˆ
or
¤¤
repeatedly until you find the desired mode:
•STANDARD–use with most documents.
•FINE–use for documents with fine detail, such as small print.
•SUPER FINE–use for documents that have extremely fine detail.
5. Press Start/Enter when you find the mode. The display asks you to
choose the home contrast mode.
6. Press
ˆˆ
or
¤¤
repeatedly until you find the desired mode:
•NORMAL–use with documents of average or normal contrast.
•DARKEN–use with documents with low contrast or light images.
•LIGHTEN–use with documents with high contrast or dark images.
•PHOTO–for obtaining maximum image quality with documents that
contain pictures or photographs with shades of gray.
7. Press Start/Enter when you find the mode. The display shows the next
setup menu ‘SOUND CONTROL ?’. For details on ‘Sound control’ menu,
see the next page.
8. To return to Standby mode, press Stop.
Sound control
You can choose an alarm tone to sound when an error occurs (ALARM
SOUND) or any key is pressed (KEY SOUND).
1. Press Menu, then press System Setup on the one-touch keypad.
The display shows ‘RINGER VOLUME ?’.
2. Press
„„
or until you find ‘SOUND CONTROL ?’.
3. Press Start/Enter. The display prompts you to turn ON or OFF the
alarm sound.
4. Press 1 to turn the sound ON, or 2 to turn it OFF. You can also use
ˆˆ
or
¤¤
button to choose ‘ON’ or ‘OFF’, then press Start/Enter to confirm.
5. The display asks you to turn ON or OFF the key sound. Press 1 to turn
the sound ON, or 2 to turn it OFF.
6. The display shows the next setup menu. To return to standby mode,
press Stop.
HOME CONTRAST
[ NORMAL ]