Filter
Top Products
Assigning a group to a one-touch button
You can use a group number as one-touch dialing. Before you can use this
feature, you must first register the group number (see ‘Storing a number for
one-touch dialing’ on page 2.32), and then store the registered group
number into an empty one-touch button.
1. Press and hold the one-touch button that you want to assign (01 through
19) for 2 seconds. Press Shift, then press and hold the one-touch button
that you want to assign (20 through 38) for 2 seconds.
2. Press Speed/Status enter the group number, then press Start/Enter. The
group number is stored in the selected one-touch button, and the display
asks you to enter one-touch button for another group dial if you wish.
3. If you want to store another one-touch group dial numbers, repeat steps
1-3. If you want to return to standby mode, press Stop.
2 Operation
2.37
Automatic dialing
Using group dialing (multi-address transmission)
You can use group dialing for memory transmission, or delayed
transmission.
Follow the procedure of the desired operation (Memory transmission -
p. 2.14, Delayed transmission - p. 2.12). When you come to a step in which
the display requests you to enter the remote fax number, press the one-
touch button to which you stored the group number. You can use only one
group number at one operation. Then continue the procedure to complete
the desired operation.
Your machine automatically scans the document loaded in the document
tray into memory, and the machine will dial each of the numbers included
in the group.