Filter
Top Products
2.33
Automatic dialing
4. Press Start/Enter when the name appears correctly or without entering a
name.
5. To set another one-touch number, press the desired one-touch button and
repeat steps 2 through 5.
Or
To return to Standby mode, press Stop.
Using a one-touch number
1. Load a document you want to send a fax.
2. Press the one-touch button (01 through 19) to which you stored a number.
Press Shift, then the one-touch button (20 through 38) to witch you stored
a number. The number will be automatically dialed, then the document
begins to transmit when the remote fax machine answers the phone.
Using one-touch label
A one-touch label sheet is included with your machine. As you store
numbers in one-touch dial buttons, make a note of the numbers on the label
to remind you which number is stored in each position.
1. Remove the clear cover and
label using an instrument with
a pointed end, as shown at
right.
2. Write information on the label
and replace the label and cover.
You may want to use pencil in
case you wish to change these
numbers later.
2 Operation