Filter
Top Products
U
SING
Y
OUR
M
ACHINE
ON
A
N
ETWORK
D.8
Configuring TCP/IP
Your machine can be set up with a variety of TCP/IP networks
information, such as an IP address, a Subnet Mask, and a
Gatway. There are several ways in which your machine can be
assigned a TCP/IP address, depending on your network.
• Static Addressing: A TCP/IP address is assigned manually by
the system administrator.
• Dynamic Addressing BOOTP/DHCP (default): A TCP/IP
address is assigned automatically by the server.
N
OTE
: Before configuring the TCP/IP, you need to set network
protocol to TCP/IP.
Static Addressing
To enter the TCP/IP address from your machine’s control panel,
take the following steps:
1
Press
Menu
until you see “Network Setup” on the top line
of the display.
2
Press the scroll button ( or ) until “Config Network”
displays on the bottom line.
3
Press
Enter
to access the menu.
The first available menu item, “TCP/IP,” appears on the
bottom line.
4
Press
Enter
.
The first available menu item, “Manual,” appears on the
bottom line.
5
Press
Enter
.
The first available menu item, “IP Address,” displays on the
bottom line.
6
Press
Enter
to access the IP Address menu.
An IP address consists of 4 bytes.
Enter a number between 0
and 255 for each byte.