Filter
Top Products
29
PJ-NET ORGANIZER
OWNER'S MANUAL
ENGLISH
Network PIN code setting
This is to set the network PIN code to restrict the access
from an unauthorized person through the network.
Enter a 4-digit number as the network PIN code onto the
text box and click
Set button.
The Network Unit begins restarting and it takes about 20
seconds. Close (Quit) the web browser and access to the
login page again in 20 seconds. This is to perform the login authentication firmly.
The default network PIN code [0000] means no network PIN code is set.
✐ When you connect the projector with this product to the network, it is recommended to set a
new network PIN code. Only a four-digit number is valid for the network PIN code.
✐ If you forget the network PIN code to the projector, you can set again by selecting "Network
PIN code" sub menu from "Network" menu on the projector. For further information, please
see item "Network PIN code setting" (
☞p. 20).
Initial setting
PJLink and password setting
This is to set the PJLink password authentication on or off.
If set "On" with the PJLink pull-down menu, the password
must be required. Enter a password* onto the text box and
click
Set button.
* 1 to 32 alphanumeric characters can be used for the password.
What's PJLink?
The projectors equipped with PJLink function can be used together on the same
network, regardless of model or brand, for centralized control and monitoring. This
standard was established by the Japan Business Machine and Information System
Industries Association (JBMIA).