Sanyo POA-PN40 Network Card User Manual


 
63
PJ-NET ORGANIZER
OWNER'S MANUAL
ENGLISH
*2 The reserved port numbers are http (80), ftp (21), SNMP (25), POP3 (110) etc. The port num-
ber 10000 is reserved to control the projector through the LAN port.
Exclusive driver software for control of the external equipment is required. This product does
not provide any driver software. Please consult your local dealer.
There are 2 types of RS-232C serial cable, Normal(Straight) and Reverse(Cross) type. Usually,
when connecting between this product and a projector or a computer, use Reverse type of
serial cable. When connecting DVD player etc., use Normal type.
Setting for controlling the equipment connected to the
serial port from the computer.
Serial Control :Selects "External"
Port number : Sets according to the computer specified port
no. Do not use port number 10000*
2
.
Other Settings : Sets according to the communication condition
of the equipment
Setting for controlling the projector from the serial con-
troller connected to the serial port.
Serial Control :Selects "Projector"
Port number :
Not specified. Do not use port number 10000*
2
.
Other Settings : Sets according to the communication condition
of the serial controller
Setting for controlling the projector from the computer
through the LAN port.
Serial Control :Not specified
Port number :Not specified
Other Settings :Not specified
* The port number of the computer must be used with 10000.
Setting examples for the serial control
Serial port setting