Filter
Top Products
46
Chapter 4 Controlling the Projector
✐ The PC adjustment settings can be stored up to 50 sets, 10 sets for Mode1 to Mode 10 are stored
into the projector and 40 sets for ExMode11 to ExMode50 are stored into the network unit.
PC adjustment
Click PC Adj. on the main menu. This function is to adjust the signal
from the computer connected to the projector to obtain the proper pic
-
ture image on the screen.
Item Description
Current mode .....
Displays a current mode like VGA, SVGA, XGA. SXGA,
UXGA, WXGA, etc. or MODE1 - MODE10, EXT11
- EXT50 which are the customized mode created by
using the "Mode Store" function described below.
Auto PC adj. ...... Performs automatic adjustment.
Fine sync. .......... Performs Fine Sync adjustment.(0 ~ 31)
Total dots ........... Adjust the number of total dots in the horizontal
period.
Clamp ................Adjusts the phase of the clamp. (1 ~ 255)
Display area
H orizontal ........Adjusts the image area horizontally.
Vertical ................Adjusts the image area vertically.
Item Description
Position
Horizontal ...... Adjusts the horizontal position of the screen.
Vertical ...........Adjusts the vertical position of the screen.
Reset ................. Rests the PC adjustments to the previous levels.
Mode Store ........ Stores the PC adjustment values. Select a mode
no. [Mode1 - Mode10, ExMode11 - ExMode50]
from the pull-down menu.
Mode Free ......... Clear the PC adjustment values. Select a mode
no. [Mode1 - Mode10, ExMode11 - ExMode50]
from the pull-down menu.
Up to 60 characters can be used
for the Memo of ExMode11 to
ExMode50.