Filter
Top Products
82
Chapter 6 Appendix
Operation
Q
Why can't I change the controls in the setting page with web browser?
A
Please make sure the projector is turned on. If it is in the standby mode, the set-
ting is not effective to the projector. To control the projector with a web browser,
the projector must be in the powered-on condition. Also, projectors registered
for multi-control cannot have any controls changed if they are in standby mode.
But timer and clock settings are always effective, even for projectors in standby
mode.
Q
Why does it sometimes take a lot of time to complete the page display?
A
The display speed of the page depends on the network environment in which
both the projector and computer are placed. It may take much time to complete
the page display if network traffic is heavy. Please consult your network adminis
-
trator. You can select the Light mode for displaying pages quickly (
☞ p.24).
Q
I use many of the projectors in the network. How can I use names of the
projectors to recognize each projector instead of IP addresses?
A
You can manage the projectors with nicknames instead of the IP address. Please
see item "Multi-Control" for further information (
☞ p.56).
By registering the projector name and IP address with the DNS server, it can be
accessed with the nickname from the any computer referred to the DNS server.
Please consult your network administrator (
☞ p.31).
Q
How many numbers of the E-mail address can I register in the E-mail
setting page?
A
You can register up to 10 addresses.