Sanyo POA-PN40 Network Card User Manual


 
52
Chapter 4 Controlling the Projector
2 Set an execute time
Type the time with (Hour:Minute) and 24 hours format.
Ex.: Type [18:25] if you specify [PM 6 o’clock and 25 minutes].
3 Select an event action
Select an event action from the pull-down menu.
Event Action
ON ......................Turns on the projector
OFF ....................Turns off the projector
Lamp Auto ..........Changes lamp mode to "Auto"
Lamp Eco ...........Changes lamp mode to "Eco"
Lamp Normal ......Changes lamp mode to "Normal"
*Available events depends on the projector function.
4 Register an event
Click Set button to register the set timer event. Repeat steps 1 to 4 for another
timer event setting.
Change the event mode
On the event list appearing by clicking Check button,
click on the event you want to delete, disable or enable.
Click
Cancel, Delete, Timer ON or Timer OFF button on
the popup pallet.
Check the timer events
To check the set timer events, click Check button.
The timer event
s are listed. The event with blue back-
ground color
represents the timer-OFF event.
Button Operation
Cancel ...............Cancels the setting
Delete ................Deletes the timer event
Timer OFF .........Disable the timer event temporarily
Timer ON ...........Enable the timer event