Filter
Top Products
46
Chapter 4 Controlling the Projector
Item Description
Lamp Interval ....Sets the interval period of
switching two lamps.
Remote Control ......Sets the remote control codes.
Lamp Counter
Reset ................Resets the lamp use-time.
Reset when replaced lamp.
P-TIMER............Used to display the timer on
the screen. The status is
changed as ON -> STOP ->
OFF when this button is
pressed repeatedly.
Factory Default ..Restore the value of the setting
items to the factory default
value.
* There may not be available depending on the
projector's model type.
Item Description
Actual Time........Displays the current time set to
the projector.
Timer Setting ....Function to switch on or off the
projector at the programmed
date and time. Please see
chapter “How to set the
Timer” for further instructions.
* Please see the pages 48 - 49 for details.
About Lamp Counter reset
The confirmation window as the left will
appear when the Reset button of the “Lamp
Counter Reset” is pressed. Select which
lamp counter is to be reset with the radio
button and then press the OK button.
* There may fail to be
reset depending on
the projector’s type.
(Set JavaScript On)
(Set JavaScript Off)
✐ There are various kind of ways to change the JavaScript preference depending on the web
browser's version and application. Please refer to chapter “Appendix: Web browser
setting/Active Script (JavaScript enable)” (☞ p.72).
* In case of 2 lamps model