Filter
Top Products
59
Network Board
OWNER’S MANUAL
ENGLISH
Load and apply the setting value
The control sets saved for each projector (☞ p.50) can be used while the multi-con-
trolled projectors function is being used. Select a setting number from the item Load
Setting No. with the pull-down menu button and then press the Set button. The con-
trol values stored with selected set number for each projector will be applied to the
individual projector assigned to that set. The same control values will not be applied
to all of the projectors under the multi-control.
Control
Display the control page by clicking on
the Control linked text on the multi-con-
trol page. The setting pages are con-
structed from 1 to 6 page and each items
are indicated on the next page.
✐ If loading a set to the multiple projectors, the contents of the set must be effective to current
accessed projector. If not, the multi-control cannot be performed.
Example: If the DVI computer input for SLOT1 is set into the “Set1” and the current
accessed projector has a video board on the SLOT1, the load set will become
invalid this time and the loading of set for the another projectors will not be carried
out.
Control