Filter
Top Products
50
Chapter 4 Controlling the Projector
Service
This function sets parameters for service items of the projector. As these
service items are used mainly for maintenance, please use the default set-
ting unless a change is needed. There may be not available items depend-
ing on the projector's function.
✐ The adjustments of H/V Area and Position are effective only for video input mode. These
adjustment values are stored with each video system mode as the above.
- The indication of video system in this page is displayed as follows.
Video System Input Signal
480I NTSC [VIDEO], [S-VIDEO], [Y, Cb/Pb, Cr/Pr]
480P NTSC [Y, Cb/Pb, Cr/Pr]
575I PAL [VIDEO], [S-VIDEO], [Y, Cb/Pb, Cr/Pr]
575P PAL [Y, Cb/Pb, Cr/Pr]
720P60 [Y, Pb, Pr]
720P50 [Y, Pb, Pr]
1035I [Y, Pb, Pr]
1080I60 [Y, Pb, Pr]
1080I50 [Y, Pb, Pr]
1080P60 [Y, Pb, Pr]
1080P50 [Y, Pb, Pr]
Item Description
Fan Control
Speed ................Sets fan control speed.
Prohibition..........Sets the prohibition of the pro-
jector control by the remote
control or the keys on the pro-
jector.
Item Description
Video System*
1
..Displays the current video sys-
tem mode.
H Area*
1
............Adjusts the horizontal effective
area.
V Area*
1
............Adjusts the vertical effective area.
H Position*
1
........Moves image horizontally
V Position*
1
........Moves image vertically.
*
1
It cannot be displayed in the computer mode.
* To restore the setting, press the Default button.
* Some projector's model types cannot support
this function.