Sanyo POA-MD13NET2 Network Card User Manual


 
90
Chapter 7 Appendix
What are the rules for IP address assignment?
If the network is constructed with TCP/IP protocol, a unique IP address is
required for each piece of network equipment. The following are basic rules of
the assignment.
Rule1
Do not configure the same IP address to the network equipment in the
same network group. Each piece of equipment must be assigned a
unique IP address.
If the IP address is set [192.168.x.x], the Subnet Mask should be set
[255.255.255.0] for example.
Rule2
The start address [xxx.xxx.xxx.0] and the last address [xxx.xxx.xxx.255]
of the IP address must not be assigned to any other equipment. These
address numbers are reserved.
Rule3
The IP address must correlate to a network number. If network numbers
are different between the equipment, they cannot establish communica-
tions each other. In this case, the router is placed in the networks to
make the routing.
What is the MAC address assigned to the Network Board?
The MAC address is indicated on the printed board as the below.
A
Q
A
Q
MAC address