Filter
Top Products
51
Network Board
OWNER’S MANUAL
ENGLISH
Check the Save items
Browse pages by clicking on the page numbers and check each setting status. The
pages for the save items are constructed by 7 pages. The contents of the pages may
differ from the actual depending on the selected input mode and the function of the
projector.
Control the Projector
Save Actual Adjustment
This function is to save and load the control values of the projector. The
storable control items are Input, PC, System, Image and Screen controls.
1 Adjust and set the controls
Set the controls properly according to the selected source. (see pages 38-44 for
further adjustment)
2 Select the Save page
Click on the Save icon from the control
menu. The setting page is displayed as
the right. Change pages by clicking on
the page numbers “1” to “7” linked
text and check the current settings.
For further information please see the
next page.
3 Name the current setting
Select a set number (Set1 to set10) you intend to store current settings with the
pull-down menu button of the Save Setting No.: Save to. Name this set number
onto the Memo text area.
4 Save the current setting
Press the Set button to store the current setting and name into the selected set
number.
✐ You can store up to 10 sets of controls into the Network Board.
Select a set
number
Type a memo for the
selected set number