Filter
Top Products
Unit 2: Technical Data
CT4i Series Operator Manual 2-3
PRINT
Method
DT models: Direct Thermal only
TT models: Thermal Transfer and Direct Thermal (switchable)
Maximum Speed (selectable)
2, 3, 4, 5, 6 Inches Per Second (CT408i)
2, 3, 4 Inches Per Second (CT412i)
2, 3 Inches Per Second (CT424i)
Resolution
CT408i: 203 Dots Per Inch (8 dpmm)
CT412i: 305 Dots Per Inch (12 dpmm)
CT424i: 609 Dots Per Inch (24 dpmm)
Maximum Print Width 4 in. (104 mm)
Maximum Print Length 15.75 in. (400 mm)
SENSING
Gap Sensitivity Adjustable
Reflective Eye-Mark Sensitivity Adjustable
Head Open Fixed
Media Out Fixed (always enabled)
Ribbon Out Fixed (always enabled)
MEDIA
Width
Media Width: 1.0 in. - 4.5 in. (25-115 mm)
With backing paper: 1.0 - 4.0 in. (28 - 118 mm)
Note: For Dispensing Mode, specifications may vary depending on the requirements
Length
0.5 -16.0 in. (15 - 397 mm)
1.0 - 15.7 in. (18 - 400 mm with Backing Paper)
Type
Direct Thermal / Thermal Transfer depending on print model (DT or TT)
Roll stock / Fan-fold
Configuration
Roll stock: Max. outer diameter: 4.3 in. (110 mm)
Wound face-out, Inner diameter of roll: 1.5 in. (40 mm)
Fanfold: Max. stack height: 3.9 in. (100 mm) (external supply)
Thickness 0.003 in.- 0.01 in. (0.08 - 0.19 mm)
Wind Direction Face Out
RIBBON
Width 4.3 in. (111 mm)
Length 328.0 feet (100 M)
Wound Face Out
Core Diameter 0.5 in. (12.7 mm)
Roll Diameter 1.5 in. (39 mm)