Unit 5: Troubleshooting
CT4i Series Operator Manual 5-8
TEST PRINT TROUBLESHOOTING
Chapter provides instruction on special printing to identify and resolve specific print problems.
HEX DUMP
Allows the operator to determine if there were problems in the downloading of data. The contents of the print buffer
can be examined using the Hex Dump Mode. In the left column, each line of data received is numbered. The center
column provides the data in hexadecimal format. And in the right column, same data is provided in the ASC ll
format. Follow the flow chart provided below to perform this activity.
TEST LABEL PRINTING
Allows the operator to identify specific problems regarding mechanical performance and setup. The test label is
designed to assist in the identification of print problems. Follow the flow chart provided below to perform this
activity.
Figure 6-2, Sample Test Label
List of DIPSW
Current Settings
Check print
quality and
print head
status here
Check resolution
and label path
here
List of
Operational and
Media Settings