Filter
Top Products
Unit 8: Adjustment Procedures
SATO MB2i Service Manual PN 9001145B Page 8-5
FACTORY CLEAR MODE
Factory clear is the process of reinitializing the printer. This process returns the printer to the
factory defaults and includes resetting the printer’s internal counters. The figure below details
dipswitch settings, operator actions, and printer responses for Factory Clear Mode.
Refer to Figure 1-1 of the Introduction unit in this manual for dipswitch location.
Figure 8-4, Factory Clear Mode
Choose Applicable Option
No Counter Clear: (DSW = 1: OFF, 2: OFF, 3: ON, 4: OFF) + Cover Open + PRINT + FEED + POWER
Head Counter Clear: (DSW = 1: OFF, 2: ON, 3: ON, 4: OFF) + Cover Open + PRINT + FEED + POWER
Head Counter/Factory Clear: (DSW = 1: ON, 2: OFF, 3: ON, 4: OFF) + Cover Open + PRINT + FEED + POWER
Close cover.
Flashes
orange and enters the
Factory Clear Mode. Blinks red
with cover open.
FEED
Confirm printing has
stopped and press
POWER.
Start/Stop
Factory Test Printing. Flashes
green while test printing.
Blinks green while Factory
Clear in progress.
Printer shuts down.