Filter
Top Products
13
2
Initial settings of operation panel
When the unit power is on, the operation panel will revert to the initial settings when
the time set with the "Auto clear time" setting (p.55) elapses after a job is finished, or
when the clear key is pressed twice.
The initial settings of the operation panel are shown below.
When copying has begun in this state, the settings in the following table are used.
Power off methods
If not used for a certain period of time, the unit will automatically enter auto power
shut-off mode (p.54) in order to minimize power consumption. In cases where the
machine will not be used for a long time, turn off the power switch and remove the
power cord from the outlet.
Copy quantity 1 copy
Exposure adjustment AUTO
Zoom 100%
Tray Paper tray 1
Two-sided copy (AL-2040CS only) The "Original to copy" indicator does
not illuminate. (One-sided copy is
selected.)
"0" is displayed in the display.
AL-2030_2040CS.book 13 ページ ２００７年４月６日 金曜日 午前１１時３２分