Filter
Top Products
<P=003>
Setting 9: DISTINCTIVE RINGING
This sets the ring pattern to which your fax will answer if you subscribe to a
distinctive ringing service. Enter a number from "1" to 5" to select a pattern. See
"Distinctive Ringing" in Chapter 2 for more details.
• Factory setting: "
5
"
Setting 10: FAX SIGNAL RECEIVE
Your fax is set to automatically begin reception if you hear a high-pitched fax tone
after answering a call on your fax or an extension phone. If you use a computer fax
modem to send documents on the same line, you must turn this setting off in order
to prevent your fax from mistakenly attempting to receive documents from the
computer fax modem. Press "1" to turn the setting on, or "2" to turn it off.
• Factory setting: "
1
"
Setting 11: JUNK NUMBER CHECK
Press "1" to prevent reception from fax numbers (and voice numbers if you are
using Caller ID) entered in the Anti Junk Number List. Press "2" to allow reception
from all numbers.
• Factory setting: "
2
"
Setting 12: POLLING
Press "1" if you want to use Rapid Key 20 as a polling key. Press "2" if you want to
use it as a regular Rapid Key.
• Factory setting: "
2
"
Setting 13: CALLER ID
If you subscribe to a caller ID service and want to use the Caller ID function, press
"1", enter your area code by pressing the number keys, and then press the START
key. To turn Caller ID off, press "2".
• Factory setting: "
2
"
Setting 14: AUTO COVER SHEET
Press "1" (YES) to have the fax automatically generate a cover sheet and send it as
the last page of each transmission. Press "2" (NO) to turn the function off.
• Factory setting: "
2
"
OPTIONAL SETTINGS
OPTIONAL SETTINGS 8-3