Filter
Top Products
UX1300U-TSPS
RT
<P=001>
11 TROUBLESHOOTING
PROBLEMS AND SOLUTIONS
Problem Check and remedy
Nothing appears in the display.
•
••
•
Make sure the power cord is properly
plugged into a power outlet.
•
••
•
Make sure the power switch has been
switched to the correct position.
•
••
•
Connect another electrical appliance to
the outlet to see if it has power.
The fax does not respond when you
press any of its keys.
•
••
•
If a beep sound is not made when you
press the keys, turn off the power and
then turn it back on several seconds
later.
Automatic document feeding does
not work for transmission or copying.
•
••
•
Check the size and weight of the
document (see "Transmittable
documents" in Chapter 3).
Dialing cannot be done.
•
••
•
Make sure the power is on.
•
••
•
Make sure that the telephone line is
properly connected to both the TEL.
LINE jack and the wall jack.
•
••
•
Make sure that the fax is set to the
correct dialing mode for your telephone
line. See Option Setting 8 in Chapter 8.
Nothing is printed at the receiving
end.
•
••
•
Make sure that the document for
transmission is placed face down in the
feeder.
•
••
•
Make sure that the printing paper is
properly loaded in the receiving machine.
A distorted image is received at the
other end.
•
••
•
Noise on the telephone line may cause
distortion. Try sending the document
again.
•
••
•
Make a copy of the document on your
fax. If the copy is also distorted, your fax
may have a problem.
TROUBLESHOOTING 11-1