Filter
Top Products
<P=004>
10
Rotate the printing head frame back
down, and press down on the "
PUSH
"
mark in the center of the frame until the
frame clicks into place. Close the printing
compartment cover.
11
If you replaced the film, initialize the new
film by pressing the
FUNCTION
key,
the "
6
" key, and the "
#
" key on the opera-
tion panel. Make sure that "INITIALIZE
FILM" appears in the display, and then
press the
START
key. (Do not perform
this step if you installed the initial sample
roll of film.)
•
••
•
You must initialize FO-16CR film to
make it wind to the starting position for
printing. If this is not done, the first
pages you print will come out blank.
Note that initialization will not be possi-
ble if the paper tray is not in the fax.
When to replace the imaging film
The sample roll of imaging film provided with your fax is capable of printing
approximately 90 pages of letter size paper. When it is used up, "FILM END " will
appear in the display. Replace it with the following imaging film, which is available
at your dealer or retailer.
FO-16CR Imaging Film
One roll of FO-16CR imaging film is capable of printing approximately 660 pages of
letter size paper.
Caution!
The text of documents printed with the imaging film is visible on the used film. If
confidential information has been printed, dispose of the film appropriately.
FUNCTION
6
START
INSTALLING THE IMAGING FILM
INSTALLATION 1-5