Filter
Top Products
SHARP
Date Issued: Feb. 9,1996
MATERIAL SAFETY DATA SHEET
MSDS No. B-1006
Section 6. Physical Chemical Characteristics
Boiling/Melting Point m.p. about 70 °C
for ink
Specific Gravity about 1
Vapor Pressure not applicable Solubility negligible (water)
Vapor Density not applicable PH not applicable
Evaporation Rate negligible Viscosity not applicable
Appearance thin film coated
with ink
Color black
Odor slight wax odor
Section 7. Fire and Explosion Data
Flash Point (Method Used): about 250 °C for ink
Ignition Temperature: not applicable
Flammable Limits: not applicable (LEL); (UEL);
Extinguishing Media: CO2, water, dry chemicals and form etc.
Special Fire Fighting Procedure: especially none
Unusual Fire and Explosion Hazard: none
Sensitivity to Mechanical Impact: no hazardous effect by mechanical impact
Sensitivity to Static Charge: not applicable
Section 8. Reactivity Data
Stability: Stable
Incompatibility (Materials to Avoid): especially none
Hazardous Decomposition: not applicable
Hazardous Polymerization: not applicable
Section 9. Precautions for Safe Handling and Use
Personal Protection Information (Respiratory, Eye Protection and Protective Glove):
not required
Engineering Control/Ventilation: especially none
Work/Hygienic Practice: especially none
Steps to be taken in case of Spill or Leak:
If rumple the product and wax layer peel off, sweep up or clean with
vacuum cleaner and wash with water.
Waste Disposal Method: Disposein an approved incinerator or contrct with licensed chemical
disposal agency.
ensure conformity with governmental disposal regulations. (Dispose by
the same method of ordinary plastic products.)
Section 10. Other Information
NFPA Rating (U.S.A.): no information
WHMIS Legislation (Canada): not controlled
Transport Information: no information
UN No.: no information
FO1650U MSDS-Front 2/2