Sharp FO-1850 Fax Machine User Manual


 
<P=003>
Clearing numbers
Note: You cannot clear a number if it is used in a program or timer operation, or if it
is included in a Group Key. First clear the number from the operation or
group, then perform the following clearing procedure. To check where the
number is used, print out the "Program/Group List and/or the "Timer List" as
described in Chapter 7.
1
Press the keys shown at left. "FAX/TEL.
# MODE" will appear in the display.
2
Press "
2
" to select CLEAR.
3
Enter the Speed Dial number that you
want to clear by pressing the number
keys.
(Example)
4
Press the
START
key.
5
Return to Step 3 to clear another num-
ber, or press
STOP
to exit.
Step 3 or
Making changes
To make changes in a number previously stored, repeat the storing procedure.
Select the code number for which you want to make changes in Step 3, and then
change the number and/or name when they appear in the display (Steps 4 and 6,
respectively).
Numbers and letters are changed as described in "Entering letters for names" in
this chapter.
FUNCTION
START
3
2
STOP
0
1
A lithium battery keeps automatic dialing numbers in memory
Your fax uses a lithium battery to keep automatic dialing numbers and other
programmed data in memory when the power is turned off. Battery power is
consumed primarily when the power is off. With the power kept continuously off, the
life of the battery is about 5 years. If the battery dies, have your dealer or retailer
replace it. Do not try to replace it yourself.
STORING NUMBERS FOR AUTOMATIC DIALING
2-22 INITIAL SETTINGS