Filter
Top Products
<P=007>
Fax reception on TAD failure
If the memory for recording incoming messages becomes full while you are out, the
answering machine will no longer be able to record messages. The ON TAD
FAILURE setting is used to choose the response of the machine to incoming calls
when this happens:
♦
Automatic fax reception "NO": The FO-1650/1850 will answer after 20 rings, after
which it will wait to receive a remote command. Most callers will hang up before
it answers; however, when you call the FO-1650/1850 from a remote location,
you can wait until it answers, listen to your messages, and then erase them (see
"Remote operations" in Chapter 4).
♦
Automatic fax reception "YES": The reception mode will switch to
FAX
mode,
allowing the FO-1650/1850 to continue to receive faxes automatically. With this
setting, you can still use the remote commands to listen to your messages and
erase the message memory (see "Remote operations").
Automatic fax reception is set to NO at the factory before shipping. If you want to
set it to YES, press the panel keys as follows:
1
Press the keys shown at left. "T.A.D.
SETTINGS" will appear in the display.
2
Press the keys shown at left. "ON TAD
FAILURE" will appear in the display.
3
Press "
1
" to turn automatic fax reception
on, or "
2
" to turn it off.
4
Press the
STOP
key.
FUNCTION
STOP
1 2
or
0
ANSWERING MACHINE SET-UP
INITIAL SETTINGS 2-15