Filter
Top Products
Maintenance
123
9. Maintenance
4
Take a sheet of clean paper and roll it
into a tube. Roll it tightly so that the
diameter of the holes at each end is
less than the thickness of your little
finger.
6
Replace the drum cartridge.
• To insert the cartridge, align the
guides on the cartridge with the
runners on the sides of the
compartment.
7
Replace the toner cartridge and close
the print compartment cover. (Refer
to Installing the Toner Cartridge in
Chapter 1.)
5
Gently wipe the surface of the drum
with the rolled-up paper to remove
any particles of toner caked on the
drum.
• Do not let the drum surface come
into contact with anything other
than the rolled-up paper.
Fingerprints, water, alcohol, and
other solvents will damage the
drum surface.
• Do not touch the drum surface with
the edges of the rolled-up paper.
all-fo2970.book Page 123 Monday, July 24, 2000 7:45 AM