Sharp FO-2970M Fax Machine User Manual


 
Making Telephone Calls
80
Comments:
While the handset of the fax is lifted (off hook), an extension phone
connected directly to the fax cannot be used to speak with the other
party.
The fax may interrupt a voice call received on an extension phone if
the reception mode is set to A.M. and there is a period of silence
during the conversation. If you are on a touch-tone phone, you can
prevent this by pressing any three keys on the phone immediately
after you answer. (Note: Do not enter the code to activate fax recep-
tion: 5, *, *.)
Searching for an auto-dial number
You can use the HOLD/SEARCH key to search for a Rapid Key or
Speed Dial number. First search for the number as described in
Searching for an auto-dial number in Sending a Fax by Automatic
Dialing in Chapter 2, then pick up the handset or press the
SPEAKER key. The number will be dialed automatically (do not
press the START key).
Redial
The last number dialed can be redialed by pressing the REDIAL key
(it is not necessary to pick up the handset or press the SPEAKER
key). When the other party answers, pick up the handset to talk.
Hold
You can put the other party on hold during a conversation by pressing
the HOLD/SEARCH key. When this is done, they cannot hear you.
You can put the handset back in the cradle without breaking the
connection. When you are ready to speak with them again, pick up the
handset. If you did not put the handset back in the cradle, press the
HOLD/SEARCH key again to resume conversation.
all-fo2970.book Page 80 Monday, July 24, 2000 7:45 AM