Sharp JW-20CM Computer Hardware User Manual


 
9·28
Lower
Upper
· Set the number of sending bytes in decimal on the parameter address 007720 to 007721
(8)
.
From the previous page
Set the number of sending bytes in decimal on the parameter address 007722 to 007723
(8)
.
To the next page
“When PC is JW model and the SEND/RECEIVE function is used”
Set top address in communication information storage area when using data memory system
of SEND/RECEIVE function
· Set file address
(8)
in parameter addresses 007710 to 007713
(8)
.
This setting is valid by 80(H)
Lower
Upper
Top address of communication information
storage area
(file address)
“When PC is JW model and the memory capacity save function is used”
007200(8)
007721(8)
· In case of setting 4 bytes using JW-13PG: Example for slave station 02 of page 9·41
Display the contents of parameter addresses 007720 to
007721(8)
00004(D)
007720(8)
007721(8)
Screen display of JW-13PG
“When PC is JW model and the memory capacity save function is used”
Set the number of receiving bytes of register link in save memory function
Lower
Upper
007722(8)
007723(8)
· In case of setting 8 bytes for parameter addresses 007722 to 007723(8) using JW-13PG: Example
for slave station 02 of page 9·41
00008(D)
007722(8)
007723(8)
Screen display of JW-13PG
Write 00004(D) after converting to decimal
Set the number of sending bytes of the relay link in save memory function [DCM (decimal), word]
007710(8)
007711(8)
007712(8)
007713(8)
File number of communication
information storage area
V5
V5
V5
07714 D 00000
07716 D 00000
I PARAM.
>07720 D 00004
07716 D 00000
07720 D 00004
I PARAM.
>07722 D 00008
Write 00008(D)
Display the contents of parameter addresses 007722 to
007723(8)