Sharp JW-20CM Computer Hardware User Manual


 
8·34
Remote I/O operation (communication) stops.
The PC continues operation. (Mode 1)
Only normal slave stations will continue
operation (communication).
The PC continues operation. (Mode 2)
Remote I/O operation (communication) stops.
The PC also stops operation. (Mode 0)
Remote I/O operation (communication) stops.
The PC continues operation. (Mode 1)
Only normal slave stations will continue
operation (communication).
The PC continues operation. (Mode 2)
Remote I/O operation (communication) stops.
The PC continues operation. (Mode 1)
Only normal slave stations will continue
operation (communication).
The PC continues operation. (Mode 2)
Remote I/O operation (communication) stops.
The PC also stops operation. (Mode 0)
Remote I/O operation (communication) stops.
The PC continues operation. (Mode 1)
Only normal slave stations will continue
operation (communication).
The PC continues operation. (Mode 2)
001
002
004
005
006
011
012
014
015
016
From the previous page
Set remote I/O operation mode [OCT (octal, word)]
· Set operation method of the remote I/O into parameter address 000000
(8)
.
Set
value(8)
Asynchronous
Synchronous
Asynchronous
Synchronous
· Concerning the contents of "synchronous" and "asynchronous" communications, see page 8·4
"Communication timing."
Set "slave station operation at error: mode 0" and "communication method: synchronous"
and "address allocation: manual"
To the next page
Display the
contents of
000000
(8)
Screen display of JW-13PG
After converting to octal
notation, write it at 014
(8)
.
17776 OCT 000
17777 OCT 000
I PARAM.
>00000 OCT 014
Operation method
Communication
method
Allocation of I/O address
Fixed allocation
Manual allocation
Operation when a slave station error occurs