Filter
Top Products
4
ABOUT THIS MANUAL
This manual explains the procedures for using scan mode, USB memory mode, Internet fax mode, PC scan mode, and
data entry mode on the machine.
Please note
• To use the Internet fax function, the Internet fax expansion kit must be installed.
• The application integration module is required to use the metadata transmission function.
• For information on installing the drivers and software cited in this manual, please refer to the Software Setup Guide and the
manuals that are provided with the expansion kits.
• To use the network scanner function, basic network scanner settings, server settings including SMTP and DNS server settings,
and destinations must be configured in the Web pages. Configure and store the settings as explained in this manual. These
settings require a knowledge of your network environment and therefore must be configured by your network administrator.
• For information on your operating system, please refer to your operating system manual or the online Help function.
• The explanations of screens and procedures in this manual are primarily for Windows
®
XP. The screens may vary in other
versions of Windows.
• Wherever "MX-xxxx" appears in this manual, please substitute your model name for "xxxx".
• Considerable care has been taken in preparing this manual. If you have any comments or concerns about the manual, please
contact your dealer or nearest SHARP Service Department.
• This product has undergone strict quality control and inspection procedures. In the unlikely event that a defect or other problem
is discovered, please contact your dealer or nearest SHARP Service Department.
• Aside from instances provided for by law, SHARP is not responsible for failures occurring during the use of the product or its
options, or failures due to incorrect operation of the product and its options, or other failures, or for any damage that occurs due
to use of the product.
Warning
• Reproduction, adaptation or translation of the contents of the manual without prior written permission is prohibited, except as
allowed under copyright laws.
• All information in this manual is subject to change without notice.
Illustrations and the operation panel and touch panel shown in this manual
The peripheral devices are generally optional, however, some models include certain peripheral devices as standard equipment.
The explanations in this manual assume that a saddle stitch finisher, punch module, and inserter are installed on the machine.
For some functions and procedures, the explanations assume that devices other than the above are installed.
The display screens, messages, and key names shown in the manual may differ from those on the actual machine
due to product improvements and modifications.