Filter
Top Products
1-50
BEFORE USING THE MACHINE
Contents
FINISHER AND SADDLE STITCH FINISHER
The finisher and the saddle stitch finisher include the offset function, which offsets each set of copies from the preceding
set for easy separation. Each set of sorted copies can also be stapled. The saddle stitch finisher can automatically
staple a set of copies at the centre line and fold the pages to create a pamphlet.
A punch module unit can be installed to add punch holes to copies, and an inserter can be installed to insert blank pages
at specified pages.
In the following explanations, the finisher and saddle stitch finisher are referred to simply as "finisher".
PART NAMES
(1) Tray
Offset pages and stapled pages are delivered here.
(2) Stapler compiler
Paper to be stapled is stacked temporarily.
(3) Top cover
Open for misfeed removal.
(4) Punch module (Option)
Adds punch holes to printed pages.
(5) Front cover
Open to replace the staple case in the staple unit or clear
jammed staples.
(6) Lower cover
Open to clear misfed paper or replace the staple
cartridge in the pamphlet unit. (MX-FN16 only)
(7) Saddle stitch tray
Saddle stitched output is delivered here.
(MX-FN16 only)
* The illustrations on the following pages (to page 1-55) show the MX-FN16; however, the operation of the MX-FN15 is
the same as the MX-FN16.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Finisher
(MX-FN15)
Saddle stitch
finisher (MX-FN16)
Finisher (MX-FN15)
Saddle stitch finisher
(MX-FN16)
• Do not press on the finisher.
• Use caution when near the offset tray during printing as the tray moves up and down.