Open as PDF
SET THE COPY QUANTITY
Set the number of copies using the two copy quantity ( ,
) keys when copying
from the document glass or copying from SPF.
• Press the right copy quantity key to set the unit digit
from 0 to 9. This key will not change the tens digit.
• Press the left copy quantity key to set the tens digit
from 1 to 9.
EXPOSURE ADJUSTMENT/PHOTO COPYING
Copy density adjustment is not required for most originals in the automatic exposure
mode. To adjust the copy density manually or to copy photographs, the exposure
level can be adjusted in five steps manually.
Press the exposure mode selector key to
select the MANUAL ( ) mode or
PHOTO ( ) mode.
Use the light ( ) and dark ( ) keys to
adjust the exposure level. If exposure level
2 is selected, the two left-handmost
indicators for that level will light up
simultaneously. Also, if level 4 is selected,
the two right-handmost indicators for that
level will light up simultaneously.
• Press the clear ( ) key to clear an entry if a mistake is made.
• A single copy can be made with the initial setting, i.e., when "0" is
The copy resolution used for AUTO and MANUAL ( ) mode can be
Tens digit Unit digit