Sharp XG-P20XU Projector User Manual


 
E-29
Setup & Connections
Rear Projection
Place a translucent screen between the projector and
the audience.
Use the projectors menu system to reverse the
projected image. (See page
57
for use of this
function.)
Optimal image quality can be achieved when the projector
is positioned perpendicular to the screen with all feet flat
and level.
Projection Using a Mirror
When the distance between the projector and screen
is not sufficient for normal rear projection, you can
use a mirror to reflect the image onto the screen.
Place a mirror (normal flat type) in front of the lens.
Project the normal image onto the mirror.
The image reflected from the mirror is projected onto
the translucent screen.
CAUTION
When using a mirror, be sure to carefully position both the
projector and the mirror so the light does not shine into the
eyes of the audience.
It is recommended that you use the optional Sharp
ceiling-mount bracket for this installation.
Before mounting the projector, contact your nearest
Authorized Sharp Industrial LCD Products Dealer or
Service Center to obtain the recommended ceiling-
mount bracket (sold separately). (AN-XGCM61
ceiling-mount bracket, AN-EP101AP extension tube
for AN-XGCM61.)
When the projector is in the inverted position, use the
upper edge of the screen as the base line.
Use the projectors menu system to select the
appropriate projection mode. (See page
57
for use
of this function.)
Ceiling-mount Projection
Image Projection